Infrared face recognition: a comprehensive review of methodologies and databases

Automatic face recognition is an area with immense practical potential which includes a wide range of commercial and law enforcement applications. Hence it is unsurprising that it continues to be one of the most active research areas of computer vision. Even after over three decades of intense research, the state-of-the-art in face recognition continues to improve, benefitting from advances in a range of different research fields such as image processing, pattern recognition, computer graphics, and physiology. Systems based on visible spectrum images, the most researched face recognition modality, have reached a significant level of maturity with some practical success. However, they continue to face challenges in the presence of illumination, pose and expression changes, as well as facial disguises, all of which can significantly decrease recognition accuracy. Amongst various approaches which have been proposed in an attempt to overcome these limitations, the use of infrared (IR) imaging has emerged as a particularly promising research direction. This paper presents a comprehensive and timely review of the literature on this subject. Our key contributions are: (i) a summary of the inherent properties of infrared imaging which makes this modality promising in the context of face recognition, (ii) a systematic review of the most influential approaches, with a focus on emerging common trends as well as key differences between alternative methodologies, (iii) a description of the main databases of infrared facial images available to the researcher, and lastly (iv) a discussion of the most promising avenues for future research.Comment: Pattern Recognition, 2014. arXiv admin note: substantial text overlap with arXiv:1306.160

Optimisation of a heat source for infrared thermography measurements : comparison to mehler engineering + service-heater

Using an optimised heating source in active thermography can facilitate the processing of measurement results. By designing a custom heat source for dynamic line scan thermography, we reduced the excitation power needed to heat the sample and decreased the unwanted side effects originating of a wide-range heating source. The design started from a regular halogen tube lamp and a reflector is composed to provide the desired heating power in a narrow band. The reflector shape is optimised using ray-tracing software to concentrate the electromagnetic radiation along with the heat in a slim line. A comparison between the optimised heat source and a commercially available line-heater is performed. The width of the heated region from the Mehler Engineering + Service-heater is larger than prescribed in the datasheet. The optimised line heater has several advantages over the comercially available heat source

Information and Communication Technologies in Engineering Education

In the emerging digital era it is difficult to train highly-skilled, competent specialists without the use of information and communication technology (ICT). The use of ICT in education increases the motivation to learn, stimulates cognitive activity and independent work, facilitates information exchange, enables interactive communication between teachers and students, and improves learning outcomes. This paper reviews the literature regarding the use of ICTs in education, explores their advantages and challenges, and surveys first-year students at the Institute of Non-Destructive Testing, National Research Tomsk Polytechnic University to determine their attitude toward ICT in foreign language learning

Unmanned aerial vehicle video-based target tracking algorithm Using sparse representation

Target tracking based on unmanned aerial vehicle (UAV) video is a significant technique in intelligent urban surveillance systems for smart city applications, such as smart transportation, road traffic monitoring, inspection of stolen vehicle, etc. In this paper, a vision-based target tracking algorithm aiming at locating UAV-captured targets, like pedestrian and vehicle, is proposed using sparse representation theory. First of all, each target candidate is sparsely represented in the subspace spanned by a joint dictionary. Then, the sparse representation coefficient is further constrained by an L2 regularization based on the temporal consistency. To cope with the partial occlusion appearing in UAV videos, a Markov Random Field (MRF)-based binary support vector with contiguous occlusion constraint is introduced to our sparse representation model. For long-term tracking, the particle filter framework along with a dynamic template update scheme is designed. Both qualitative and quantitative experiments implemented on visible (Vis) and infrared (IR) UAV videos prove that the presented tracker can achieve better performances in terms of precision rate and success rate when compared with other state-of-the-art tracker

Influence of dust on temperature measurement using infrared thermal imager

Temperature measurement by infrared thermal imager is an attractive technique in many fields, and it is of great importance to ensure the measurement accuracy of the infrared thermal imager. Aiming at the influence of dust on the temperature measurement of infrared thermal imager, this paper summarized the dust influence into three categories: dust on the surface of the measured object, dust on the infrared thermal imager’s lens and dust in the optical path between the measured object and the infrared thermal imager, and conducted three dust experiments. To quantify the measurement errors caused by dust, the infrared thermal image features that are affected by dust are extracted and a compensation model is established based on polynomial regression. The results indicate that dust can introduce measurement errors of infrared thermal imager and the proposed compensation method can compensate for the measurement errors caused by dust and improve the accuracy of infrared thermal imager

Visible and near-infrared light transmission : a hybrid imaging method for non-destructive meat quality evaluation

Visual inspection of the amount of external marbling (intramuscular fat) on the meat surface is the official method used to assign the quality grading level of meat. However, this method is based exclusively on the analysis of the meat surface without any information about the internal content of the meat sample. In this paper, a new method using visible (VIS) and near-infrared (NIR) light transmission is used to evaluate the quality of beef meat based on the marbling detection. It is demonstrated that using NIR light in transmission mode, it is possible to detect the fat not only on the surface, as in traditional methods, but also under the surface. Moreover, in combining the analysis of the two sides of the meat simple, it is possible to estimate the volumetric marbling which is not accessible by visual methods commonly proposed in computer vision. To the best of our knowledge, no similar work or method has been published or developed. The experimental results confirm the expected properties of the proposed method and illustrate the quality of the results obtained

Thermographic non-destructive evaluation for natural fiber-reinforced composite laminates

Natural fibers, including mineral and plant fibers, are increasingly used for polymer composite materials due to their low environmental impact. In this paper, thermographic non-destructive inspection techniques were used to evaluate and characterize basalt, jute/hemp and bagasse fibers composite panels. Different defects were analyzed in terms of impact damage, delaminations and resin abnormalities. Of particular interest, homogeneous particleboards of sugarcane bagasse, a new plant fiber material, were studied. Pulsed phase thermography and principal component thermography were used as the post-processing methods. In addition, ultrasonic C-scan and continuous wave terahertz imaging were also carried out on the mineral fiber laminates for comparative purposes. Finally, an analytical comparison of different methods was give

Monitoring of jute/hemp fiber hybrid laminates by nondestructive testing techniques

Abstract Damage following static indentation of jute/hemp (50 wt.% total fiber content) hybrid laminates was detected by a number of nondestructive testing (NDT) techniques, in particular, near (NIR) and short-wave (SWIR) infrared reflectography and transmittography, infrared thermography (IRT), digital speckle photography (DSP), and holographic interferometry (HI), to discover and evaluate real defects in a laminate with a complex structure. A comparative study between thermographic data acquired in the mid- (MWIR) and long-wave infrared (LWIR) spectrum bands, by pulsed (PT) and square pulse (SPT) thermography, is reported and analyzed. A thermal simulation by COMSOL® Multiphysics (COMSOL Inc., Burlington, MA, USA) to validate the heating provided is also added. The robust SOBI (SOBI-RO) algorithm, available into the ICALAB Toolbox (BSI RIKEN ABSP Lab, Hirosawa, Japan) and operating in the MATLAB® (The MathWorks, Inc., Natick, MA, USA) environment, was applied on SPT data with results comparable to the ones acquired by several thermographic techniques. Finally, segmentation operators were applied both to the NIR/SWIR transmittography images and to a characteristic principal component thermography (PCT) image (EOFs) to visualize damage in the area surrounding indentation

Infrared image enhancement using adaptive histogram partition and brightness correction

Infrared image enhancement is a crucial pre-processing technique in intelligent urban surveillance systems for Smart City applications. Existing grayscale mapping-based algorithms always suffer from over-enhancement of the background, noise amplification, and brightness distortion. To cope with these problems, an infrared image enhancement method based on adaptive histogram partition and brightness correction is proposed. First, the grayscale histogram is adaptively segmented into several sub-histograms by a locally weighted scatter plot smoothing algorithm and local minima examination. Then, the fore-and background sub-histograms are distinguished according to a proposed metric called grayscale density. The foreground sub-histograms are equalized using a local contrast weighted distribution for the purpose of enhancing the local details, while the background sub-histograms maintain the corresponding proportions of the whole dynamic range in order to avoid over-enhancement. Meanwhile, a visual correction factor considering the property of human vision is designed to reduce the effect of noise during the procedure of grayscale re-mapping. Lastly, particle swarm optimization is used to correct the mean brightness of the output by virtue of a reference image. Both qualitative and quantitative evaluations implemented on real infrared images demonstrate the superiority of our method when compared with other conventional methods